002231 - Fin Alignment Guide

(35 customer reviews)

002231 - Fin Alignment Guide

(35 customer reviews)
  • FAST & ACCURATE fin alignment
  • Great for three or four finned rockets
  • Fits body tubes ranging from BT-20 to BT-80

$23.99

Availability: In stock

002231

For This Accessory

You May Be Interested In...

You may also like…

A precision molded accessory that makes it easy to glue three or four fins to various sized body tubes ranging from BT-20 to BT-80 diameters. Unique and adjustable vertical fin holders can accommodate either 3/32 in. or 1/8 in. balsa, bass or plywood fins. This is a must-have tool for any serious model rocket builder.

Never attach your fins wrong again and remove that painful process of holding them in place while the adhesive dries!

Weight1.5 lbs

35 reviews for 002231 – Fin Alignment Guide

  1. Robert

    A must have tool when you get beyond E2X

    Boy, do I wish I had this when I started building rockets as a kid! I guess better late than never. This is a must have tool for balsa constructs. I’ve built a few rockets with this (Swift, Crossfire) and it has made a world of difference when getting the rockets to perform well during launch and in-flight. Get it, get it!

  2. jesper

    it does what it should

    it is just as effective at helping to put wings on the rocket.

  3. Joseph

    Separates The Pros From The Newbies

    One key to good model rocket flight performance is accurately aligned fins. You’ll see your rockets fly straighter and higher if you use the Estes Fin Alignment Guide. Also, it’s great for accurately aligning fins for scale models…….less points deducted for craftmanship errors!

  4. Wayne

    Great timesaver

    Since I started using the Fin Alignment Guide, I very rarely have to use the printed marking guides on the rocket kit instruction sheets. As long as the motor mount is in the body tube (or if the tube is a BT-5, 20, or 50), the alignment guide will give automatic alignment for 3 or 4 fin rockets. This is a great timesaver, and it holds the fins for gluing, so I can glue all the fins at once.

  5. Eric

    Must have when you get serious!

    If you plan on spending any real time in this hobby, move up from lines on paper and get yourself one of these. This is the single most useful tool for model rocket building I’ve ever had. Get those fins in the right place, and keep ’em straight while they dry. No more “screwy” flights!

  6. Seth

    useful

    this is really useful for the commanche and other skill level 3 rockets

  7. Apostoli

    savor, oh grate one..

    this one saved me from throwing out my best rocket!! I love this must have accessory

  8. PINKFLOYDFAN

    THE PERFECT TOOL

    THIS IS SOMETHING EVERY ROCKET FAN NEED FOR THEIR TOOL BOX.IT IS WELL WORTH THE COST,AND GIVES YOU THE PERFECT FLIGHT WE ARE LOOKING FOR.

  9. Matthew

    great

    my dad used to launch rockets and we got his old one and it works great after 40 years

  10. Mrhemi1971

    Great item!

    I have owned one of these for years, and it saves a LOT of build time if you use CA glue for your fins, Gets those fins on straight, and makes your rocket safer to fly. The screw holes are handy if you decide to mount it to your workbench (Highly recommended!)

Add a review

Your email address will not be published.