007256 – Puma™

$14.99

Advanced Skill
(Formerly Skill Level 3)

Soars to over 400 feet and powered by mini engines. A fun build with family and friends!

Download Instructions

In stock

Share with your friends!
  •  
  •  
  •  
  •  
  •  

Description

Advanced Skill
(Formerly Skill Level 3)

Mini-engine powered and designed to hang with the 7232 Scorpion and 7233 Lynx, the Puma is a must have to add to your collection! We will challenge your building skills just a bit but when you are finished, the PUMA is a rocket you will be proud of! Quick off the pad so keep your eyes open……

WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, fine sandpaper, carpenter’s glue, hobby knife, clear tape, primer (white), paint (black, orange, white) and clear coat (optional). (Tools, construction and finishing supplies not included.)

WHAT YOU NEED TO LAUNCH (sold separately): Estes Porta-Pad II Launch Pad with a 1/8 inch launch rod and Electron Beam Launch Controller, Estes model rocket engines, starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).

WarningWARNING

Additional information

Projected Max Altitude

400 ft. (122 m)

Recovery System

9 in. (22.9 cm) Parachute

Length

12.3 in. (31.2 cm)

Diameter

.74 in. (19 mm)

Estimated Weight

.8 oz. (22.7 g)

Estimated Assembly Time

4 Hours (painting and glue drying time not included)

Fin Materials

Laser cut wood

Decal Type

Waterslide

Launch System

Porta-Pad II and Electron Beam Launch Controller

Launch Rod Size

1/8"

Age Recommendation

Estes model rocketry is recommended for boys and girls ages 10+ with adult supervision for those under 12, and rocketeers of all ages.

2 reviews for 007256 – Puma™

  1. Doug

    Crowd pleaser

    Everyone including me loves the looks of this model. It takes some time to build and paint to a good finish, it is well worth it. I fly it almost every launch. I also have converted it to mylar streamers,

  2. Alphanaut

    A rewarding build for drag racing.

    I’ve enjoyed building these smaller rockets with interesting designs and great looks. The Puma, like the Scorpion and Lynx, offers a bit more challenge than a standard small build, but the results are rewarding. Actually the Puma is the easiest to assemble of the three in this series, but just as sharp in its looks. I found one adjustment to the instructions. The 1/8″ dowel should be cut in three 1.5″ lengths versus 1.0″ otherwise the build sequence was easy to follow. I’m looking forward to drag racing these three together on A10-3Ts.

Add a review

Your email address will not be published. Required fields are marked *



X