002310 – Lifetime Launch System

(2 customer reviews)


  • Made to withstand the rigors of multiple uses
  • Includes a Pro Series II controller, 30 feet of cable and two different size launch rods
  • Comes with a Lifetime Limited Warranty

Out of stock

Share with your friends!
  • 3


Introducing the first and only Estes launch pad built with teachers and group leaders in mind. Built to last, this complete launch system lives up to its name by being backed by a lifetime limited warranty. The launch pad stands a full 18 inches off the ground, allowing enough room for students to load and service their rocket before launching.

The included Pro Series II Launch Controller and 30-foot launch cable can accommodate any single or cluster powered rockets. The launch base also features and adjustable launch rod holder that can handle either of the included 1/8 in. or 3/16 in. diameter launch rods, which are suitable for most model rocket programs. The Pro Series II Launch Controller features an audible continuity system that allows students to clearly hear if the starter is connected correctly to ensure a positive ignition and lift off.

WHAT YOU NEED TO BUILD: Pliers or 7/16 socket and wrench. (Tools not included.)

Additional information


30 ft. (9.1m) launch cable
Pro Series II Launch Controller
Two Launch Rods : 1/8 in. and 3/16 in.
Lifetime Limited Warranty


Stands 18 inches off the ground. Students can easily see starter wires and make good connections.
Audible Continuity : Students can hear if the starter is connected correctly.
Two hand push button launch system for extra safety.

Estimated Assembly Time

10 Minutes

Launch Rod Size

Includes two rods : 1/8 in. (3mm) and 3/16 in. (5mm)

2 reviews for 002310 – Lifetime Launch System

  1. Tanner Ehresmann (verified owner)

    When I use a a 3/16th rod and tighten the system down, it won’t stay straight. As soon as I put a rocket on. It slowly starts to lean to the side the rocket on, making it unable to launch at an angle I want. I’ll need to find a way to fix this without buying a whole new unit

  2. sbradfor (verified owner)

    It’s a pretty good system but it was extremely stupid of Estes to NOT include end caps for the part that goes into the ground. This would have kept the whole system cleaner and hardly added any cost (I picked some up at my local hardware store for less than a dollar).

    I contacted Estes support and they said it wasn’t “designed” for end caps. They didn’t even state the size of the plastic pipe correctly. What useless support! The correct size is 1 1/4 inch for those of you that want to add what Estes overlooked.

Add a review

Your email address will not be published. Required fields are marked *