Estes 7310 Antar Box with Rocket
Estes 7310 Antar Recovery
Estes 7310 Antar Up Flame
Estes 7310 Antar Side Flame
Estes 7310 Antar Flight Sequence
Estes 7310 Antar Parts

Antar™

SKU: 007310
$32.99
Sale
Advanced

Discover the origins of model rocketry with the Designer Signature Series kit from Harry Stine, the "Father of Model Rocketry" and founder of the National Association of Rocketry. As one of the original pioneers of the hobby, Stine's talent for science and writing was integral to its creation. This kit includes a precise replica of the Antar model rocket, based on multiple sketches and the original model owned by Bill Stine, Estes Vice President and Harry's son.

However, originally a fictional vehicle, Stine's knowledge of flight science made it possible to create a stable flying model rocket. To build, you'll need scissors, glue, sandpaper, and other basic supplies. For launching, the Porta-Pad II Launch Pad and Electron Beam Launch Controller, as well as Estes model rocket engines, starters, and recovery wadding are required (sold separately). Embark on a journey of exploration and learning with this unique kit.

  • SKILL LEVEL: With moderate building and finishing skills, the Antar is perfect for this Advanced level rocket.
  • RECOMMENDED ENGINES: B6-2, B6-4, C6-5
  • PROJECTED ALTITUDE: 450 ft. (137 m) on a C6-5


Overview

History of Antar Model Rocket

The "Father of Model Rocketry" and founder of the National Association of Rocketry is Harry Stine (NAR #02). What's more, he is one of the original pioneers that founded the hobby right alongside Vern Estes, Stine was also a talented writer.

Estes' designers created a precise replica for this Designer Signature Series kit. Moreover, it is based on multiple sketches and the original model, which belongs to Bill Stine, Estes Vice President and the son of Harry Stine.

In 1951, people didn't have the hobby of flying model rockets yet. Therefore, they didn't design Antar as a flying model rocket. Stine was a physicist and clearly understood the science of flight. So even though Antar was a fictional vehicle, the science behind it meant it could be stable in flight.

Antar Model Rocket:

  • Initially created in 1951
  • They did not design it as a flying model rocket
  • Designed to be stable enough in flight to be used as a model rocket
  • Precise replica created for the Designer Signature Series kit by Estes' designers
  • Replica based on multiple sketches and the original model owned by Bill Stine, Estes Vice President and the son of Harry Stine

Overall, the history of the Antar model rocket is a fascinating story. It showcases the innovative and adventurous early hobbyists who laid the groundwork for modern model rocketry.

Technical Specifications

Technical Specifications

  • Recommended Engines

B6-2, B6-4, C6-5
  • Launch System

Porta-Pad II 
  • Projected Max Altitude

450 ft. (137 m)  
  • Recovery System

15 in. (38.1 cm) Parachute   
  • Length

23.2 In. (58.9 cm) 
  • Diameter

1.64 in. (42 mm) 
  • Weight

3.7 oz. (104.9 g) 
  • Fin Material

Laser Cut Balsa Wood 
This product recommended for children ages 10+ with adult supervision for those under 12, and rocketeers of all ages.

What You Need to Fly

Estes Porta-Pad II Launch Pad and Electron Beam Launch Controller, Estes model rocket engines, starters and recovery wadding.
Four 1.5V high quality AA alkaline batteries (sold separately)

Customer Reviews

Based on 6 reviews
83%
(5)
0%
(0)
0%
(0)
0%
(0)
17%
(1)
B
Brayden
Sucks in flight

This rocket flew good the first launch then after that the consistency and the flight quality went down. The parachute did not come out of the tube even with all the required equipment, wading and baby powder still didn't deploy. Went up then came down hard broke all three back fins. Do not buy, waste of money and time. But it was funny to watch it do some acrobatics in the air.

T
Thomas Wolf
A blast from the past

I have been building rockets for over 40 years and when this rocket became available, I put it on my wish list. I recently purchased it and was glad to add it to my collection. The build has some challenges. There are more fins on this rocket thant the standard 3 or 4. Tke your time and get each one placed correctly and true. The rocket cradle needs to be assembled really flat to aid in aligning the main fins later. Overall a fun and exciting rocket to build. I am looking forward to the special day when this rocket gets moved to the launch pad.

L
Leslie Mullen
USA!

I’d like to see kits made in the USA!