Ventris
Ventris
Ventris
Ventris

Ventris

Código: 009701
$89.99
Venta Agotado

Boasting a bold, eye-catching design and powerful performance for its skill level, no collection is complete without this special bring back from the Estes model rocket family. The Ventris can reach staggering heights of up to 800 feet with Estes standard F15-4 model rocket engines and is equipped with laser-cut wooden fins for increased efficiency in the air. The Ventris makes its return only for a limited time, so get yours today!

Estes Pro Series II™ products are bigger and better than ever, giving you all the power you need to reach towering heights! Experience the awesome power of rockets that fly on our 29 mm engines!

When it's time to launch, you'll need an Estes Pro Series II™ Launch Pad and Pro Series II™ Launch Controller, as well as Estes model rocket engines, starters, and recovery wadding. Ensure you have six, ‘C’ size alkaline batteries for the launch controller secured, then you'll be prepared to launch!

  • SKILL LEVEL: The Ventris is an Intermediate level rocket that will help a budding rocketeer develop some basic model building and finishing skills.
  • RECOMMENDED ENGINES: F15-4
  • PROJECTED ALTITUDE: 800 ft (243.84 m) on a F15-4
  • RECOVERY SYSTEM: 24 in (60 cm) Nylon parachute

Descripción general

Boasting a bold, eye-catching design and powerful performance for its skill level, no collection is complete without this special bring back from the Estes model rocket family. The Ventris can reach staggering heights of up to 800 feet with Estes standard F15-4 model rocket engines and is equipped with laser-cut wooden fins for increased efficiency in the air. The Ventris makes its return only for a limited time, so get yours today! The Ventris is an incredible way to make your mark in the sky, giving you an unforgettable experience as you watch it soar. Get your own limited-edition model while supplies last.

The Return of an Estes Fan Favorite

The Ventris is a handsome payloader with a large diameter payload bay and stylish curved fins which made it a longstanding Estes fan favorite. Built for performance and power, the Ventris is sure to make an impression on the sky with its eye-catching design and impressive thrust output to reach the stars.

Estes Pro Series II™ products are bigger and better than ever, giving you all the power you need to reach towering heights! Experience the awesome power of rockets that fly on our 29 mm engines! When it's time to launch, you'll need an Estes Pro Series II™ Launch Pad and Pro Series II™ Launch Controller, as well as Estes model rocket engines, starters, and recovery wadding. Ensure you have six, ‘C’ size alkaline batteries for the launch controller secured, then you'll be prepared to launch! The Pro Series II™ Launch Pad and controller make the power of rocketry accessible with a simple setup and launch sequence. You can trust that the included model rocket engines, starters, and recovery wadding will give you a safe and reliable launch. Ready for lift-off!

Lo que necesitas para volar

Pro Series Launch Pad, Pro Series Launch Controller, 1/4" Launch Rod, Estes Engines and Pro Series Recovery Wadding.

Especificaciones técnicas

  • Motores recomendados

F15-4
  • Sistema de lanzamiento

Pro Series Launch Pad
  • Altitud máxima proyectada

800 ft. (244 m)
  • Sistema de recuperación

24 in. (60.96 cm) Parachute
  • Longitud

46.25 in (117.5 cm)
  • Diámetro

2.5 in. (6.4 cm)
  • Weight

15.6 oz. (442.3 g)
  • Material de la aleta

Laser Cut Plywood

Necesario para construir (se vende por separado)

Scissors, Pencil, Ruler, Fine Sandpaper, Carpenters Glue, Epoxy, Modeling Knife, Masking Tape, Paint & Primer

Customer Reviews

Based on 4 reviews
50%
(2)
50%
(2)
0%
(0)
0%
(0)
0%
(0)
R
Ronald J Winans
Have one

Bought one a 7 years ago.

set up for composite Engines which i think have disappeared. So, there is no bulkhead to stop keep the motor from shooting completely out the nose on ignition. Suggestions?

T
T L Stump
Ventris = Very nice mid-sized rocket

Nice to see the Builder PSII's back. I've built two Ventrises (sp?), both original run kits. The first was built absolutely stock, including decor. The paint & decor scheme is so reminiscent of the old Centuri Hustler, I decided to build the second as a slightly upscale Hustler. It uses a shortened 2" body tube and a lengthened 2 1/2" payload tube, with a short lower section of the nosecone painted with a black band--this gives the appearance of a shorter nosecone like the original Hustler. Fins were two-piece 3/16" balsa, laminated for strength, just like the original Hustler kit. I chose a yellow/white/black decor as seen in the old SEMROC Hustler ads, with added custom black oval decals with yellow "Centuri" lettering. I always wanted to build a Hustler, and now I finally have. 5 stars, and 5 hearts, too!

A
Aaron ivanushka
About time estes

This is an amazing flyer and sturdy too. It's a fun rocket and I recommend this build despite the cost. Who cares about the cost when it brings so much joy.